No.6 Hongkong Middle Road, Qingdao, China
Skid steer loaders are also known as skid steers, multi-purpose vehicles, and multi-purpose engineering machines. It is a wheel-type special chassis device that uses the speed difference between the two wheels to achieve vehicle steering. It is mainly used in occasions where the job site is small, the floor is uneven, and the job content is frequently changed.
Suitable for infrastructure construction, industrial applications, dock handling, urban streets, houses, barns, barns, airport runways, etc., but also can be used as a large-scale construction machinery auxiliary equipment. There are two types of skid steer loaders: wheeled and tracked.
Model | JC45 | ||
Engiine modei | 490 | ||
Bore xstroke (mm) | 95X105 | ||
Rated power (Kw) | 37 | ||
Rotating speed ( rpm) | 2650 | ||
Number of cylinders | 4 | ||
Max. torque (N .m) | 156 | ||
Displace ment ( L) | 2.67 | ||
Max.Speed（km/h） | 12 | ||
Tire（track） modei | 10-16.5 | ||
Operating load (kg) | 700 | ||
Lifting | Arc lift | ||
Bucket capacity (m³) | 0.4 | ||
Rated flux (L/min) | 75 | ||
High Flow Flux (L/min) | |||
Fuel tank capacity (L) | 65 | ||
self weight bucket (kg) | 2700 | ||
| JC45 | ||
Overall operating height (mm) | 3980 | ||
Height to bucket hinge pin (mm) | 3080 | ||
Height to top of cab (mm) | 2140 | ||
Height to bottom of level bucket(mm) | 2913 | ||
Overall length ithout bucket（mm） | 2640 | ||
overall length with bucket(mm) | 3420 | ||
Dumping angle at maximum height(°) | 40 | ||
Dumping height(mm) | 2380 | ||
Dumping reach(mm) | 700 | ||
Rollback o bucket on ground(°) | 30 | ||
Rollback of bucket at full height(°) | 104 | ||
Wheelbase(mm) | 991 | ||
Ground clearance(mm) | 185 | ||
Front turning radins without bucket(mm) | 1168 | ||
Front tuning radius(mm) | 1958 | ||
Rear tuning radius(mm) | 1630 | ||
Rear axle to bumper (mm) | 1108 | ||
Tread width,enterline to centerline (mm) | 1450 | ||
Width (mm) | 1720 | ||
Bucket width (mm) | 1740 | ||
