No.6 Hongkong Middle Road, Qingdao, China
1. It is widely used for lifting, clearing works, loading, broom, breaking and so on And it can be used in these places. For example: farms, pasture, feed factory, family and factory;
2. The more non -slip of the track is suitable for complex pavement;
3. This machine is competent for the work in narrow place and saves a lot of labor. Easy maintenance, up per cover can be open totally;
4. Long life, adopting high-strength chain to drive machine, the hydraulic motor transmits the power to the wheels through two ingenious designed chains on both sides, it is very easy to adjust and maintain outside, thus can guarantee transmission efficiency of the chains and more long-term service life;
5. Secure and tracking service Operating environment Small volume, light weight, small in turning radius, multi-usages.
JC120 | |
额定载重 Operating load (kg) | 1200 |
最大行驶速度Max Speed（km/h） | 9/18 |
液压流量Rated flux (L/min) | 140 |
轮胎型号Tire（track） model | 12-16.5 |
额定功率Rated power (Kw) | 103 |
燃油箱容量Fuel tank capacity (L) | 90 |
操作重量self weight bucket (kg) | 3600 |
铲斗容积Bucket capacity (m³) | 0.55 |
A | 最大操作高度Overall operating height (mm) | 4070 |
B | 铲斗销高度Height to bucket hinge pin (mm) | 3280 |
C | 驾驶室顶高度 height to top of cab (mm) | 2160 |
D | 铲斗知其底部的最大高度Height to bottom of level bucket(mm) | 3140 |
E | 不带铲斗总长Without bucket length（mm） | 2880 |
F | 带铲斗总长overall length with bucket(mm) | 3580 |
G | 最大高度卸载角度 Dumping angle at maximum height(°) | 40 |
H | 卸料高度Dumping height(mm) | 2500 |
I | 卸载距离 Dumping reach(mm) | 700 |
J | 铲斗在地面的反转角度 Rollback o bucket on ground(°) | 30 |
K | 铲斗在最高时翻转角度 Rollback of bucket at full height(°) | 104 |
L | 轴距 Wheelbase(mm) | 1115 |
M | 离地间隙Ground clearance(mm) | 205 |
N | 离去角Angle of departure(°) | 20 |
O | 不带铲斗时转弯半径 Front turning radius without bucket(mm) | 1287 |
P | 前转弯半径Front tuning radius(mm) | 2144 |
Q | 后转弯半径Rear tuning radius(mm) | 1857 |
R | 尾部长度Rear axle to bumper (mm) | 1082 |
S | 轮距（标准轮胎）Tread width (mm) | 1500 |
T | 车宽（标准轮胎）Width (mm) | 1880 |
U | 带标准铲斗宽度 Bucket width (mm) | 1880 |
